Transfers Iron Orchid Designs

IOD Transfers are pressure sensitive images that rub on to various surfaces for Home Decor and Arts & Crafts. When IOD designs the transfers, it's increasingly important to them to approach them with sustainable, classic designs so that you know your hard work and artistry will be appreciated for years to come.

IOD TRANSFERS Rub-on transfers are adhesive and can be applied to many surfaces including furniture, wood, walls, glass, mirrors for most DIY projects. They can be temporary or permanent depending on how they are used. When choosing a rub-on transfer IOD are very High Quality.

With little instruction, they are easy to use and add instant beauty to your projects.

Start with a clean, dry, matte surface. If painted, make sure it’s well cured, and if you have sanded the paint make certain there is no residual dust. All of these things will interfere with adhesion. For best adhesion, seal your project surface with a high quality, water-based
polyurethane sealer in matte before applying a transfer.

Carefully remove the transfer from its white backing. Slowly and carefully lower the transfer onto your intended surface, making sure that it does not touch until the placement is correct. Use small pieces of low tack tape to hold it in place.

Using the provided tool, or one of your choice, start at one end of the transfer and rub firmly to adhere the image to the surface. Do this until the entire image is transferred. You are welcome for the free arm workout as well. If any parts aren’t transferred when you lift, simply lay it back down and rub more on that portion. After it is transferred, with a clean dry hand, smooth down any bits that aren’t flatly adhered.

We recommend sealing with a water based (or not harsh
solvent based) sealer (waxes created for chalk type paints also work well if they don’t contain harsh solvents).

Keep your transfer with its backing sheet until you are ready to apply. Keep free of dust or debris, which will interfere with adhesion. Do not allow the adhesive side of transfer to touch anything prior to application. When handling the transfer, avoid letting the adhesive side touch itself. Do not store transfers in extreme temperatures or humid conditions, this can affect adhesion.